T80 - Bishop'S Landing, Celina, TX
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
Location:
FAA Identifier: T80
Latitude/Longitude: 33-22-35.4750N / 096-43-44.1700W
33.3764 / -96.7289
Elevation: 750 feet MSL (Estimated)
Magnetic Variation: 06E (1995)
Land Area Covered: 32 acres
From City: 5 nautical miles NE of Celina, TX
County/Parish: Collin, TX
Airport Operations:
Airport Use: Public
Activiation Date: 8/1/2000 12:00:00 AM
Sectional Chart: Dallas-Ft Worth
Control Tower: No
ARTCC: Fort Worth Center (ZFW)
FSS: Fort Worth Flight Service Station ()
Attendance: UNATNDD
Wind Indicator: Yes
Segmented Circle: No
Lights:
Beacon:
Communications:
CTAF: 122.9
Services:
Runway Information:
Runway: 17/35
Dimensions: 1580 x 80 ft.
Surface: Grass, sod - in good condition
Runway 17 Runway 35
Latitude: 33-22-43.2900N Latitude: 33-22-27.6600N
Longitude: 096-43-44.1400W Longitude: 096-43-44.2000W
Elevation: 749 ft. Elevation: 733 ft.
Traffic Pattern: Left Traffic Pattern: Right
Displaced Threshold: No Displaced Threshold: No
Markings: Markings:
Airport Ownership and Management:
Ownership: Privately Owned
Owner: Bobby Bishop
8955 Cr 135
Celina, TX 75009
(214) 280-4408
Manager: Bobby Bishop
8955 Cr 135
Celina, TX 75009
(214) 280-4408
Sectional:
Remarks:
  • FOR CD CTC REGIONAL APCH AT 972-615-2799.
  • RY SOFT AFT RAIN. CALL AMGR FOR FLD CONDS.
  • PRVDD PLINES ON NORTH END BURIED.

FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable for any financial loss, damages or injury due the use of, or reference to the information displayed above. Always call ahead to confirm any information listed and the existence of the destination. Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information. Please read our Disclaimer.