MD46 - Glenair, Dayton, MD
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
Location:
FAA Identifier: MD46
Latitude/Longitude: 39-16-10.3780N / 077-00-18.9200W
39.2695 / -77.005
Elevation: 590 feet MSL (Estimated)
Magnetic Variation: 10W (1985)
Land Area Covered: 45 acres
From City: 2 nautical miles NW of Dayton, MD
County/Parish: Howard, MD
Airport Operations:
Airport Use: Private
Activiation Date: 3/1/1974 12:00:00 AM
Sectional Chart: Washington
Control Tower: No
ARTCC: Washington Center (ZDC)
FSS: Leesburg Flight Service Station ()
Attendance: IREG
Wind Indicator: Yes
Segmented Circle: No
Lights: See Rmk
Beacon:
Landing Fee: No
Communications:
Services:
Airframe Repair: None
Power Plant Repair: None
Runway Information:
Runway: 10/28
Dimensions: 2200 x 50 ft.
Surface: Grass, sod
Runway Edge Lights: Medium intensity
Runway 10 Runway 28
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Traffic Pattern: Right Traffic Pattern: Left
Displaced Threshold: No Displaced Threshold: No
Markings: Markings:
Airport Ownership and Management:
Ownership: Privately Owned
Owner: Glenair Association
3657 Sharp Road
Glenwood, MD 21738
301-497-4436
Manager: Diana Atwell
3657 Sharp Road
Glenwood, MD 21738
(443) 295-3339
Sectional:
Remarks:
  • DIANA ATWEL, PRESIDENT
  • ADIZ FLIGHT PLAN REQUIRED FOR INGRESS/ EGRESS
  • OPERATIONS FOR 12 MONTHS ENDING SEP 2006 GA LOCAL
  • LIGHTED VGSI PANEL
  • FOR RY LGTS CALL 301-854-6684.

FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable for any financial loss, damages or injury due the use of, or reference to the information displayed above. Always call ahead to confirm any information listed and the existence of the destination. Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information. Please read our Disclaimer.