AVL - Asheville Rgnl, Asheville, NC
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
Location:
FAA Identifier: AVL
Latitude/Longitude: 35-26-04.0000N / 082-32-33.8240W
35.4344 / -82.5425
Elevation: 2162 feet MSL (Surveyed)
Magnetic Variation: 07W (2020)
Land Area Covered: 900 acres
From City: 9 nautical miles S of Asheville, NC
County/Parish: Buncombe, NC
Airport Operations:
Airport Use: Public
Activiation Date: 1/1/1961 12:00:00 AM
Sectional Chart: Atlanta
Control Tower: Yes
ARTCC: Atlanta Center (ZTL)
FSS: Raleigh Flight Service Station ()
Attendance: Continuous
Wind Indicator: Yes - Lighted
Segmented Circle: Yes
Lights: See Rmk
Beacon: White-Green (lighted land airport)
International Operations: No
Landing Fee: No
Communications:
Unicom: 122.95
CTAF: 121.1
LCL/P 121.1
LCL/P 257.8
GND/P 121.9
EMERG 121.5
EMERG 243.0
ATIS 120.2
APCH/P DEP/P CLASS C IC 124.65(160-339)
APCH/P DEP/P CLASS C IC 269.575(340-159)
APCH/P DEP/P CLASS C 125.8(340-159)
APCH/P DEP/P CLASS C 351.8(160-339)
COMM UNAVBL BLO 6000 FT EXCP BY RDU RADIO ON FREQ 122.1R (SUGARLOAF RCO) WHEN AVL APCH CTL CLSD.
APCH/DEP SVC PRVDD BY ATLANTA ARTCC ON FREQS 132.625/353.625 (SUGARLOAF MOUNTAIN RCAG) WHEN APCH CTL CLSD.
Services:
Fuel available: 100LL Jet-A
Airframe Repair: Minor
Power Plant Repair: Minor
Bottled oxygen: High
Bulk oxygen: None
Runway Information:
Runway: 17/35
Dimensions: 7001 x 100 ft.
Surface: Asphalt - in excellent condition
Surface Treatment: Saw-cut or plastic groove
Weight Bearing Capacity:
Single wheel: 120 K lbs.
Double wheel: 207 K lbs.
Double tandem: 352 K lbs.
Runway Edge Lights: High intensity
Runway 17 Runway 35
Latitude: 35-26-36.4959N Latitude: 35-25-31.5042N
Longitude: 082-32-48.4148W Longitude: 082-32-19.2370W
Elevation: 2162 ft. Elevation: 2112 ft.
Gradient: 0.4% Gradient: 0.7%
Traffic Pattern: Left Traffic Pattern: Right
Displaced Threshold: No Displaced Threshold: No
Declared distances: 6601 Feet - Actual Stop Distance Available.
7001 Feet - Take Off Distance Available.
6601 Feet - Landing Distance Available.
7001 Feet - Take Off Run Available.
Declared distances: 7001 Feet - Actual Stop Distance Available.
7001 Feet - Take Off Distance Available.
7001 Feet - Landing Distance Available.
7001 Feet - Take Off Run Available.
Markings: PIR - Precision instrument, Good condition Markings: PIR - Precision instrument, Good condition
Visual Glide Angle: Visual Glide Angle:
RVR Equipment: rollout RVR Equipment: touchdown
Runway End Identifier Lights: Yes Runway End Identifier Lights: Yes
Centerline Lights: No Centerline Lights: No
Touchdown Lights: Touchdown Lights: No
Airport Ownership and Management:
Ownership: Publicly Owned
Owner:
61 Terminal Dr Suite 1
Fletcher, NC 28732-9442
828-684-2226
Manager: Lew S. Bleiweis, A.A.E.
61 Terminal Drive; Suite 1
Fletcher, NC 28732-9442
828-684-2226
Sectional:
Remarks:
  • GREATER ASHEVILLE REGIONAL AIRPORT AUTHORITY
  • FOR THE ASHEVILLE REGIONAL AIRPORT AIRCRAFT DIVERSIONS EMERGENCY CONTINGENCY PLAN AND FACILITY CONSTRAINTS CTC ARPT ADMIN AT 828-684-2226.
  • FLOCKS OF MIGRATORY BIRDS ON AND INVOF ARPT.
  • RWY 16/34 CLOSED. PORTIONS AVAILABLE FOR TAXI TO AND FROM RWY 17/35.
  • EMERGENCY PHONE: 828-209-5100 NON-EMERGENCY PHONE: 828-684-4577
  • RIGHT TRAFFIC WHEN ATCT CLSD.
  • PPR FOR UNSKED ACR OPNS WITH MORE THAN 30 PSGR SEATS 0400-1200Z; CALL APRT COMM 828-684-4577.
  • HIRL PRESET TO OFF WHEN TWR CLSD, TO INCREASE INTNSTY AND ACTIVATE HIRL RYS 17 & 35 - CTAF.
  • NORTH.
  • NORTH.

FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable for any financial loss, damages or injury due the use of, or reference to the information displayed above. Always call ahead to confirm any information listed and the existence of the destination. Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information. Please read our Disclaimer.