7TX4 - Hillcrest, Keller, TX
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
Location:
FAA Identifier: 7TX4
Latitude/Longitude: 32-58-00.4490N / 097-16-31.0570W
32.9667 / -97.2753
Elevation: 710 feet MSL (Estimated)
Magnetic Variation: 07E (1985)
Land Area Covered: acres
From City: 2 nautical miles N of Keller, TX
County/Parish: Tarrant, TX
Airport Operations:
Airport Use: Private
Activiation Date: 4/1/1983 12:00:00 AM
Sectional Chart: Dallas-Ft Worth
Control Tower: No
ARTCC: Fort Worth Center (ZFW)
FSS: Fort Worth Flight Service Station ()
Attendance: UNATNDD
Wind Indicator: Yes
Segmented Circle: No
Lights: Ss-Sr
Beacon:
Communications:
Services:
Runway Information:
Runway: 17/35
Dimensions: 2000 x 30 ft.
Surface: Asphalt
Runway Edge Lights: Low intensity
Runway 17 Runway 35
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Traffic Pattern: Right Traffic Pattern: Left
Displaced Threshold: No Displaced Threshold: 340 ft.
Markings: Markings:
Airport Ownership and Management:
Ownership: Privately Owned
Owner: Hillcrest Homeowners Assn
12999 Hillcrest Blvd
Keller, TX 76244

Manager: President Of Homeowners Assn
12999 Hillcrest Blvd
Keller, TX 76244

Sectional:
Remarks:
  • AMGR EMAIL HOAHILLCREST@YAHOO.COM
  • PRVDD LANDING THRS ARE LCTD TO PRVD AN APCH SLOPE CLEARANCE OF 20:1 OVER ANY OBSTRUCTIONS IN THE APCH AREAS; VERTICAL CLEARANCE OF 15' IS TO BE PRVDD OVER ROADWAY.

FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable for any financial loss, damages or injury due the use of, or reference to the information displayed above. Always call ahead to confirm any information listed and the existence of the destination. Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information. Please read our Disclaimer.