7AR0 - Hammer Field, Eureka Springs, AR
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
Location:
FAA Identifier: 7AR0
Latitude/Longitude: 36-25-53.2000N / 093-41-57.5000W
36.4314 / -93.6991
Elevation: 1600 feet MSL (Estimated)
Magnetic Variation: ()
Land Area Covered: 50 acres
From City: 3 nautical miles NE of Eureka Springs, AR
County/Parish: Carroll, AR
Airport Operations:
Airport Use: Private
Activiation Date: 7/1/2003 12:00:00 AM
Sectional Chart: Kansas City
Control Tower: No
ARTCC: Memphis Center (ZME)
FSS: Jonesboro Flight Service Station ()
Attendance: UNATNDD
Wind Indicator: Yes
Segmented Circle: No
Lights:
Beacon:
Communications:
Services:
Runway Information:
Runway: 07/25
Dimensions: 2100 x 75 ft.
Surface: Grass, sod
Runway 07 Runway 25
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Traffic Pattern: Left Traffic Pattern: Left
Displaced Threshold: No Displaced Threshold: No
Markings: Markings:
Runway: 16/34
Dimensions: 2100 x 75 ft.
Surface: Grass, sod
Runway 16 Runway 34
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Traffic Pattern: Left Traffic Pattern: Left
Displaced Threshold: No Displaced Threshold: No
Markings: Markings:
Airport Ownership and Management:
Ownership: Privately Owned
Owner: Thomas M. Hammer
1911 Cr 207
Eureka Springs, AR 72632
479-253-7273
Manager: Tom Hammer
1911 Cr 207
Eureka Springs, AR 72632
479-253-7273
Sectional:
Remarks:

FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable for any financial loss, damages or injury due the use of, or reference to the information displayed above. Always call ahead to confirm any information listed and the existence of the destination. Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information. Please read our Disclaimer.