63XS - Byram Ranch, Henly, TX
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
Location:
FAA Identifier: 63XS
Latitude/Longitude: 30-13-26.7320N / 098-17-19.0630W
30.2239 / -98.2886
Elevation: 1120 feet MSL (Estimated)
Magnetic Variation: 07E (1985)
Land Area Covered: acres
From City: 4 nautical miles W of Henly, TX
County/Parish: Blanco, TX
Airport Operations:
Airport Use: Private
Activiation Date: 9/1/1978 12:00:00 AM
Sectional Chart: San Antonio
Control Tower: No
ARTCC: Houston Center (ZHU)
FSS: San Angelo Flight Service Station ()
Attendance: UNATNDD
Wind Indicator: Yes
Segmented Circle: No
Lights: See Rmk
Beacon:
Landing Fee: No
Communications:
Services:
Runway Information:
Runway: 17/35
Dimensions: 4100 x 40 ft.
Surface: Asphalt
Runway Edge Lights: Medium intensity
Runway 17 Runway 35
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Traffic Pattern: Left Traffic Pattern: Left
Displaced Threshold: No Displaced Threshold: No
Markings: Markings:
Obstructions: Obstructions: OTHER OBSTRUCTIONS: HILLS, FENCES, & BLDGS.
Airport Ownership and Management:
Ownership: Privately Owned
Owner: John D. Byram
510 S Congress Suite 400
Austin, TX 78704
512-474-4242
Manager: John D. Byram
510 S Congress Suite 400
Austin, TX 78704
512-474-4242
Sectional:
Remarks:
  • OTHER OBSTRUCTIONS: HILLS, FENCES, & BLDGS.
  • FOR RWY LGTS CALL 512-444-1743.
  • PRVDD A MNM 20:1 APCH SLOPE TO EACH RWY END MAINTD; VFR OPNS ONLY.

FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable for any financial loss, damages or injury due the use of, or reference to the information displayed above. Always call ahead to confirm any information listed and the existence of the destination. Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information. Please read our Disclaimer.