0MD1 - Taylor Field, Sudlersville, MD
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
Location:
FAA Identifier: 0MD1
Latitude/Longitude: 39-11-14.4000N / 075-47-33.7620W
39.1872 / -75.7925
Elevation: 75 feet MSL (Estimated)
Magnetic Variation: 11W (1990)
Land Area Covered: 3 acres
From City: 3 nautical miles E of Sudlersville, MD
County/Parish: Queen Annes, MD
Airport Operations:
Airport Use: Private
Activiation Date: 10/1/1991 12:00:00 AM
Sectional Chart: Washington
Control Tower: No
ARTCC: Washington Center (ZDC)
FSS: Leesburg Flight Service Station ()
Attendance: UNATNDD
Wind Indicator: Yes
Segmented Circle: No
Lights:
Beacon:
Communications:
Services:
Runway Information:
Runway: 08/26
Dimensions: 3000 x 50 ft.
Surface: Grass, sod
Runway 08 Runway 26
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Traffic Pattern: Left Traffic Pattern: Left
Displaced Threshold: No Displaced Threshold: No
Markings: Markings:
Airport Ownership and Management:
Ownership: Privately Owned
Owner: John S. & Annabelle E. Taylor
1913 Peters Corner Road
Marydel, MD 21649-1224
410-438-3178
Manager: John S. Taylor
1913 Peters Corner Road
Marydel, MD 21649-1224
410-438-3178
Sectional:
Remarks:
  • PRVDD DALGT, VFR, PVT USE; DISPLACE THR ON RY 08 TO PROVIDE 20:1 OR BURY POWER LINES; REMOVE OR LOWER TREES OR DISPLACE THR ON RY 26 TO PROVIDE 20:1; MOVE BLDG OUT OF PRIMARY SFC; MOVE BLDG OUT OF TRANSITIONAL SFC; 3 OBJECTS ON EAST SIDE OF RY 26 END BE R

FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable for any financial loss, damages or injury due the use of, or reference to the information displayed above. Always call ahead to confirm any information listed and the existence of the destination. Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information. Please read our Disclaimer.