OK23 - Taliaferro Field, Ardmore, OK
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
Location:
FAA Identifier: OK23
Latitude/Longitude: 34-11-53.8800N / 097-13-52.2000W
34.198 / -97.2311
Elevation: 930 feet MSL (Estimated)
Magnetic Variation: ()
Land Area Covered: acres
From City: 5 nautical miles NW of Ardmore, OK
County/Parish: Carter, OK
Airport Operations:
Airport Use: Private
Activiation Date: 1/1/2006 12:00:00 AM
Sectional Chart: Dallas-Ft Worth
Control Tower: No
ARTCC: Fort Worth Center (ZFW)
FSS: Mc Alester Flight Service Station ()
Attendance: UNATNDD
Wind Indicator:
Segmented Circle:
Lights:
Beacon:
Communications:
Services:
Runway Information:
Runway: 17/35
Dimensions: 1100 x 55 ft.
Surface: Grass, sod
Runway 17 Runway 35
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Traffic Pattern: Right Traffic Pattern: Left
Displaced Threshold: No Displaced Threshold: No
Markings: Markings:
Airport Ownership and Management:
Ownership: Privately Owned
Owner: Jimmy Taliaferro
9627 Brock Rd
Ardmore, OK 73401
580-657-3900
Manager: Eric Faliaferro
7189 Prairie Valley
Ardmore, OK 73401
580-618-2020
Sectional:
Remarks:
  • ALL TRAFFIC REMAIN WEST OF RY AND SOUTH OF ROAD THAT LIES BTN COLBY FIELD AND TALIAFERRO FIELD.
  • ALL TRAAFFIC MONITOR FREQ 122.75.
  • PRVDD CLEAR 20:1 APCHS, ALL TRAFFIC REMAIN WEST OF RY AND SOUTH OF THE ROAD; AND MONITOR FREQ 122.75.

FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable for any financial loss, damages or injury due the use of, or reference to the information displayed above. Always call ahead to confirm any information listed and the existence of the destination. Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information. Please read our Disclaimer.