NK24 - Tilden, Montour Falls, NY
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
Location:
FAA Identifier: NK24
Latitude/Longitude: 42-20-50.2640N / 076-52-43.8520W
42.3472 / -76.8786
Elevation: 900 feet MSL (Estimated)
Magnetic Variation: 11W (1990)
Land Area Covered: acres
From City: 1 nautical miles NW of Montour Falls, NY
County/Parish: Schuyler, NY
Airport Operations:
Airport Use: Private
Activiation Date: 12/1/1993 12:00:00 AM
Sectional Chart: New York
Control Tower: No
ARTCC: New York Center (ZNY)
FSS: Buffalo Flight Service Station ()
Attendance: UNATNDD
Wind Indicator:
Segmented Circle: No
Lights:
Beacon:
Communications:
Services:
Runway Information:
Runway: 01/19
Dimensions: 1600 x 60 ft.
Surface: Grass, sod
Runway 01 Runway 19
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Traffic Pattern: Left Traffic Pattern: Left
Displaced Threshold: No Displaced Threshold: No
Markings: Markings:
Airport Ownership and Management:
Ownership: Privately Owned
Owner: Robert D. Tilden
3640 Cr 16
Montour Falls, NY 14865
607-535-2217
Manager: Robert D. Tilden
3640 Cr 16
Montour Falls, NY 14865
607-535-2217
Sectional:
Remarks:
  • OWNER DESIRES ARPT NOT BE CHARTED.
  • RY SURROUNDED ON 3 SIDES BY HIGH TERRAIN & ON EAST SIDE BY TREES; IN ONE LOCATION RY ONLY 25 FT WIDE; ON WEST SIDE OF RY EMBANKMENT TOO CLOSE & A 325 FT TOWER IS LOCATED 0.3 MILES FROM NORTHEAST END OF RY.

FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable for any financial loss, damages or injury due the use of, or reference to the information displayed above. Always call ahead to confirm any information listed and the existence of the destination. Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information. Please read our Disclaimer.