9IN3 - Johnsons Strawberry Farm, Hobart, IN
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
Location:
FAA Identifier: 9IN3
Latitude/Longitude: 41-33-25.0000N / 087-13-35.0000W
41.5569 / -87.2264
Elevation: 620 feet MSL (Estimated)
Magnetic Variation: ()
Land Area Covered: acres
From City: 3 nautical miles NE of Hobart, IN
County/Parish: Lake, IN
Airport Operations:
Airport Use: Private
Activiation Date: 10/1/2004 12:00:00 AM
Sectional Chart: Chicago
Control Tower: No
ARTCC: Chicago Center (ZAU)
FSS: Terre Haute Flight Service Station ()
Attendance: UNATNDD
Wind Indicator:
Segmented Circle:
Lights:
Beacon:
Communications:
Services:
Runway Information:
Runway: 18/36
Dimensions: 2000 x 60 ft.
Surface: Grass, sod
Runway 18 Runway 36
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Traffic Pattern: Left Traffic Pattern: Right
Displaced Threshold: No Displaced Threshold: No
Markings: Markings:
Airport Ownership and Management:
Ownership: Privately Owned
Owner: Rodney Johnson
8960 E Ridge Road
Hobart, IN 46342
219-962-4035
Manager: Rodney Johnson
8960 E Ridge Road
Hobart, IN 46342
219-771-4409
Sectional:
Remarks:
  • 200 FT CELL TWR 1/4 NM SW AND LGTD 494 FT TWR 1.5 NM SE OF RY.
  • ALL TFC PATTERNS ARE TO BE FLOWN ON THE E SIDE OF THE RY.
  • PRVDD ALL TFC PATTERNS ARE FLOWN E OF THE RY; CLEAR 20:1 APCHS; CLEAR OBSTACLE FREE ZONE;AND CLEAR RY SAFETY AREAS.

FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable for any financial loss, damages or injury due the use of, or reference to the information displayed above. Always call ahead to confirm any information listed and the existence of the destination. Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information. Please read our Disclaimer.