7FL3 - Adams Ranch, Fort Pierce, FL
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
Location:
FAA Identifier: 7FL3
Latitude/Longitude: 27-26-31.1420N / 080-35-03.2010W
27.4419 / -80.5841
Elevation: 25 feet MSL (Estimated)
Magnetic Variation: 03W (1985)
Land Area Covered: 7 acres
From City: 14 nautical miles W of Fort Pierce, FL
County/Parish: St Lucie, FL
Airport Operations:
Airport Use: Private
Activiation Date: 8/1/1991 12:00:00 AM
Sectional Chart: Miami
Control Tower: No
ARTCC: Miami Center (ZMA)
FSS: Miami Flight Service Station ()
Attendance: UNATNDD
Wind Indicator: Yes
Segmented Circle: No
Lights:
Beacon:
Communications:
Services:
Runway Information:
Runway: 08/26
Dimensions: 2625 x 135 ft.
Surface: Grass, sod - in good condition
Runway 08 Runway 26
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Traffic Pattern: Left Traffic Pattern: Left
Displaced Threshold: 200 ft. Displaced Threshold: 150 ft.
Markings: Markings:
Airport Ownership and Management:
Ownership: Privately Owned
Owner: Adams Ranch Inc.
P O Box 12909
Ft Pierce, FL 34979-2909
407-461-6321
Manager: Michael Adams
P O Box 12909
Ft Pierce, FL 34979-2909
407-461-6321
Sectional:
Remarks:
  • ULTRALIGHT ACTIVITY ON AND INVOF ARPT.
  • 08/26 THRS ARE MKD WITH THR MARKERS; EDGES NOT MKD.
  • PRVDD OPNS ARE CONDUCTED IN VFR WX CONDS; LANDING FOR PVT USE; TRAFFIC PATTERN ARRANGEMENT WITH DRAGON FLY ARPT.

FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable for any financial loss, damages or injury due the use of, or reference to the information displayed above. Always call ahead to confirm any information listed and the existence of the destination. Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information. Please read our Disclaimer.