3PN6 - Gravel Run, Cambridge Springs, PA
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
Location:
FAA Identifier: 3PN6
Latitude/Longitude: 41-45-00.2030N / 080-04-59.2020W
41.75 / -80.0831
Elevation: 1240 feet MSL (Estimated)
Magnetic Variation: 08W (1985)
Land Area Covered: acres
From City: 9 nautical miles S of Cambridge Springs, PA
County/Parish: Crawford, PA
Airport Operations:
Airport Use: Private
Activiation Date: 12/1/1977 12:00:00 AM
Sectional Chart: Detroit
Control Tower: No
ARTCC: Cleveland Center (ZOB)
FSS: Altoona Flight Service Station ()
Attendance: UNATNDD
Wind Indicator: Yes
Segmented Circle: No
Lights:
Beacon:
Landing Fee: No
Communications:
Services:
Airframe Repair: None
Power Plant Repair: None
Bottled oxygen: None
Bulk oxygen: None
Runway Information:
Runway: 13/31
Dimensions: 2000 x 100 ft.
Surface: Grass, sod
Runway 13 Runway 31
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Traffic Pattern: Left Traffic Pattern: Left
Displaced Threshold: No Displaced Threshold: No
Markings: Markings:
Runway End Identifier Lights: No Runway End Identifier Lights: No
Centerline Lights: No Centerline Lights: No
Touchdown Lights: No Touchdown Lights: No
Airport Ownership and Management:
Ownership: Privately Owned
Owner: Rust Family Trust
23385 Amy Road
Saegertown, PA 16433
814-398-4354
Manager: Minnette Clipper
23385 Amy Road
Saegertown, PA 16433
814-573-0163
Sectional:
Remarks:

FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable for any financial loss, damages or injury due the use of, or reference to the information displayed above. Always call ahead to confirm any information listed and the existence of the destination. Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information. Please read our Disclaimer.