08KS - Alderson, Bennington, KS
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
Location:
FAA Identifier: 08KS
Latitude/Longitude: 39-02-03.7950N / 097-34-47.9950W
39.0341 / -97.5798
Elevation: 1250 feet MSL (Estimated)
Magnetic Variation: 07E (1985)
Land Area Covered: 10 acres
From City: 1 nautical miles E of Bennington, KS
County/Parish: Ottawa, KS
Airport Operations:
Airport Use: Private
Activiation Date: 9/1/1980 12:00:00 AM
Sectional Chart: Wichita
Control Tower: No
ARTCC: Kansas City Center (ZKC)
FSS: Wichita Flight Service Station ()
Attendance: ALL/ALL/0700-1900
Wind Indicator: Yes
Segmented Circle: No
Lights: See Rmk
Beacon:
Landing Fee: No
Communications:
Services:
Runway Information:
Runway: 17/35
Dimensions: 2500 x 70 ft.
Surface: Gravel
Runway Edge Lights: Low intensity
Runway 17 Runway 35
Latitude: 39-02-16.1500N Latitude: 39-01-51.4400N
Longitude: 097-34-48.3200W Longitude: 097-34-47.6700W
Elevation: 1234 ft. Elevation: 1216 ft.
Traffic Pattern: Left Traffic Pattern: Left
Displaced Threshold: No Displaced Threshold: No
Markings: Markings:
Airport Ownership and Management:
Ownership: Privately Owned
Owner: Larry Alderson
1885 K 18
Bennington, KS 67422
785-766-6893
Manager: Larry Alderson
1885 K 18
Bennington, KS 67422
785-766-6893
Sectional:
Remarks:
  • FOR LIRL RWY 17/35 CALL 785-766-6893.
  • ADEQUATE TRAFFIC PATTERNS CANNOT BE ESTABLISHED BETWEEN ALDERSON AND BERKLEY AIRPORTS.

FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable for any financial loss, damages or injury due the use of, or reference to the information displayed above. Always call ahead to confirm any information listed and the existence of the destination. Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information. Please read our Disclaimer.