VG34 - Merifield, Clarksville, VA
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
Location:
FAA Identifier: VG34
Latitude/Longitude: 36-35-04.5090N / 078-30-02.9960W
36.5844 / -78.5006
Elevation: 355 feet MSL (Surveyed)
Magnetic Variation: 07W (1985)
Land Area Covered: 10 acres
From City: 3 nautical miles SE of Clarksville, VA
County/Parish: Mecklenburg, VA
Airport Operations:
Airport Use: Private
Activiation Date: 11/1/1966 12:00:00 AM
Sectional Chart: Washington
Control Tower: No
ARTCC: Washington Center (ZDC)
FSS: Leesburg Flight Service Station ()
Attendance: UNATNDD
Wind Indicator: Yes
Segmented Circle: No
Lights:
Beacon:
Landing Fee: No
Communications:
Services:
Airframe Repair: None
Power Plant Repair: None
Runway Information:
Runway: 15/33
Dimensions: 2375 x 75 ft.
Surface: Grass, sod - in good condition
Runway 15 Runway 33
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Traffic Pattern: Left Traffic Pattern: Left
Displaced Threshold: No Displaced Threshold: No
Markings: Markings:
Airport Ownership and Management:
Ownership: Privately Owned
Owner: Merifield Acres Landowners
515 Meriwether Dr.
Clarksville, VA 23927
434-374-9922
Manager: Francis J, Hale, Iii
1329 Duplin Rd.
Raleigh, NC 27607
919-787-4965
Sectional:
Remarks:
  • APCH RY 33 AND DEP RY 15.
  • RWY 15/33 MARKED BY WHITE METAL CONES-FAIR CONDITION
  • RECORD PURPOSES ONLY

FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable for any financial loss, damages or injury due the use of, or reference to the information displayed above. Always call ahead to confirm any information listed and the existence of the destination. Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information. Please read our Disclaimer.