PS25 - Captain'S Folly, Gettysburg, PA
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
Location:
FAA Identifier: PS25
Latitude/Longitude: 39-50-36.3470N / 077-09-53.0000W
39.8433 / -77.1647
Elevation: 641 feet MSL (Estimated)
Magnetic Variation: 10W (1985)
Land Area Covered: 3 acres
From City: 4 nautical miles E of Gettysburg, PA
County/Parish: Adams, PA
Airport Operations:
Airport Use: Private
Activiation Date: 11/1/1983 12:00:00 AM
Sectional Chart: Washington
Control Tower: No
ARTCC: New York Center (ZNY)
FSS: Williamsport Flight Service Station ()
Attendance: IREG
Wind Indicator: Yes
Segmented Circle: No
Lights: See Rmk
Beacon:
Landing Fee: No
Communications:
Services:
Runway Information:
Runway: 04/22
Dimensions: 3175 x 55 ft.
Surface: Grass, sod - in good condition
Runway Edge Lights: Low intensity
Runway 04 Runway 22
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Traffic Pattern: Left Traffic Pattern: Left
Displaced Threshold: 1700 ft. Displaced Threshold: 1400 ft.
Markings: NSTD - Non-standard (other than numbers only) Markings: NSTD - Non-standard (other than numbers only)
Airport Ownership and Management:
Ownership: Privately Owned
Owner: Richard J. Sherman
120 Hoffman Road
Gettysburg, PA 17325
717-334-8378
Manager: Richard J. Sherman
120 Hoffman Road
Gettysburg, PA 17325
717-334-8378
Sectional:
Remarks:
  • ACTVT LIRL RY 04/22 - 122.850
  • RDO-CTL

FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable for any financial loss, damages or injury due the use of, or reference to the information displayed above. Always call ahead to confirm any information listed and the existence of the destination. Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information. Please read our Disclaimer.