MRF - Marfa Muni, Marfa, TX
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
Location:
FAA Identifier: MRF
Latitude/Longitude: 30-22-16.0000N / 104-01-03.1000W
30.3711 / -104.0175
Elevation: 4848 feet MSL (Surveyed)
Magnetic Variation: 08E (2010)
Land Area Covered: 816 acres
From City: 3 nautical miles N of Marfa, TX
County/Parish: Presidio, TX
Airport Operations:
Airport Use: Public
Activiation Date: 1/1/1947 12:00:00 AM
Sectional Chart: El Paso
Control Tower: No
ARTCC: Albuquerque Center (ZAB)
FSS: San Angelo Flight Service Station ()
Attendance: ALL/ALL/1400-2200
Wind Indicator: Yes
Segmented Circle: Yes
Lights: See Rmk
Beacon: White-Green (lighted land airport)
International Operations: No
Landing Fee: Yes
Communications:
Unicom: 122.8
CTAF: 122.8
APCH/DEP SERVICE PRVDD BY ALBUQUERQUE ARTCC ON FREQS 135.875/292.15 (FORT STOCKTON RCAG).
Services:
Fuel available: 100LL Jet-A
Airframe Repair: Minor
Power Plant Repair: Major
Bottled oxygen: None
Bulk oxygen: None
Runway Information:
Runway: 04/22
Dimensions: 5309 x 75 ft.
Surface: Asphalt - in good condition
Weight Bearing Capacity:
Single wheel: 18 K lbs.
Runway 04 Runway 22
Latitude: 30-21-56.5408N Latitude: 30-22-33.4964N
Longitude: 104-01-13.6491W Longitude: 104-00-30.5779W
Elevation: 4827 ft. Elevation: 4849 ft.
Gradient: 0.4% Gradient: 0.4%
Traffic Pattern: Left Traffic Pattern: Left
Displaced Threshold: No Displaced Threshold: No
Markings: BSC - Basic, Good condition Markings: BSC - Basic, Good condition
Touchdown Lights: Touchdown Lights: Yes
Runway: 09/27
Dimensions: 2825 x 60 ft.
Surface: Natural soil - in poor condition
Runway 09 Runway 27
Latitude: 30-22-10.7799N Latitude: 30-22-10.4947N
Longitude: 104-01-31.2993W Longitude: 104-00-59.0603W
Elevation: 4829 ft. Elevation: 4834 ft.
Gradient: 0.4% Gradient: 0.2%
Traffic Pattern: Left Traffic Pattern: Left
Displaced Threshold: No Displaced Threshold: No
Markings: Markings:
Runway: 13/31
Dimensions: 6203 x 75 ft.
Surface: Asphalt - in good condition
Weight Bearing Capacity:
Single wheel: 18 K lbs.
Runway Edge Lights: Medium intensity
Runway 13 Runway 31
Latitude: 30-22-41.0717N Latitude: 30-21-57.4249N
Longitude: 104-01-31.7866W Longitude: 104-00-42.0053W
Elevation: 4840 ft. Elevation: 4830 ft.
Gradient: 0.3% Gradient: 0.3%
Traffic Pattern: Left Traffic Pattern: Left
Displaced Threshold: No Displaced Threshold: No
Markings: NPI - Non-precision instrument, Good condition Markings: NPI - Non-precision instrument, Good condition
Visual Glide Angle: Visual Glide Angle:
Airport Ownership and Management:
Ownership: Publicly Owned
Owner: Presidio County
P.O. Box 606
Marfa, TX 79843
432-729-4452
Manager: Rudy Estor
45101 Sh 17
Marfa, TX 79843
832-5888-8888
Sectional:
Remarks:
  • 104 FT AGL UNLGTD WATER TOWER 1800 FT S OF AER 31.
  • GLIDER OPNS ON & INVOF ARPT.
  • WILDLIFE ON & INVOF ARPT.
  • ALL DIAGONAL TWY BTN TWY B AND RWY 4/22 CLSD.
  • PARL TWY ADJ RWY 04/22 CLSD EXC BTN TWY A AND RWY 13/31.
  • PARKING RAMP HAS IRREGULAR SURFACES. PROCEED WITH CAUTION USING SLOWER THAN NORMAL SPEED.
  • PAVED SFCS UNDER RPR DUE TO HVY ACFT USE. ACFT OVER 18000 SNGL WHEEL NA.
  • 12 FT SCATTERED CACTUS 22 FT TO 62 FT FM THLD TO 229 FT RIGHT.
  • 10 FT ROAD AT THLD ON BOTH SIDES OF CENTERLINE, 8 FT SCATTERED CACTUS 158 FT FM THLD, 167 FT LEFT.
  • 10 FT SCTD CACTUS FM THLD TO 79 FT FM THLD, 109 FT LEFT.
  • 100LL, JET-A, SELF SERVE AVLBL 24 HRS.
  • GLIDER INSTRUCTION ONLY
  • MIRL RY 13/31 PRESET LOW INTST; TO INCR INTST ACTVT - CTAF.

FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable for any financial loss, damages or injury due the use of, or reference to the information displayed above. Always call ahead to confirm any information listed and the existence of the destination. Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information. Please read our Disclaimer.