FD88 - Aero Acres, Fort Pierce, FL
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
Location:
FAA Identifier: FD88
Latitude/Longitude: 27-20-31.1530N / 080-31-19.1960W
27.3419 / -80.522
Elevation: 25 feet MSL (Estimated)
Magnetic Variation: 03W (1985)
Land Area Covered: 184 acres
From City: 11 nautical miles SW of Fort Pierce, FL
County/Parish: St Lucie, FL
Airport Operations:
Airport Use: Private
Activiation Date: 2/1/1990 12:00:00 AM
Sectional Chart: Miami
Control Tower: No
ARTCC: Miami Center (ZMA)
FSS: Miami Flight Service Station ()
Attendance: UNATNDD
Wind Indicator: Yes - Lighted
Segmented Circle: No
Lights: See Rmk
Beacon: Split-White-Green (Lighted military airport)
Communications:
Services:
Runway Information:
Runway: 09/27
Dimensions: 3150 x 50 ft.
Surface: Portland cement concrete
Runway Edge Lights: Medium intensity
Runway 09 Runway 27
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Traffic Pattern: Left Traffic Pattern: Left
Displaced Threshold: 300 ft. Displaced Threshold: 300 ft.
Markings: Markings:
Airport Ownership and Management:
Ownership: Privately Owned
Owner: Aero Acres Property Owners
18506 Mach One Drive
Port St Lucie, FL 34987
772-595-9562
Manager: Bebe Owen
18506 Mach One Drive
Port St Lucie, FL 34988
772-595-9562
Sectional:
Remarks:
  • BIRDS ON RUNWAY.
  • FOR MIRL RY 09/27 5 CLICKS ON 122.9.
  • PROVIDED VFR/PVT USE.

FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable for any financial loss, damages or injury due the use of, or reference to the information displayed above. Always call ahead to confirm any information listed and the existence of the destination. Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information. Please read our Disclaimer.