59PN - Brookside Farms, Hershey, PA
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
Location:
FAA Identifier: 59PN
Latitude/Longitude: 40-18-57.3230N / 076-41-08.8880W
40.3158 / -76.6855
Elevation: 489 feet MSL (Estimated)
Magnetic Variation: 10W (1985)
Land Area Covered: 6 acres
From City: 3 nautical miles NW of Hershey, PA
County/Parish: Dauphin, PA
Airport Operations:
Airport Use: Private
Activiation Date: 10/1/1961 12:00:00 AM
Sectional Chart: New York
Control Tower: No
ARTCC: New York Center (ZNY)
FSS: Williamsport Flight Service Station ()
Attendance: UNATNDD
Wind Indicator: No
Segmented Circle: No
Lights:
Beacon:
International Operations: No
Landing Fee: No
Communications:
Services:
Airframe Repair: None
Power Plant Repair: None
Runway Information:
Runway: 09/27
Dimensions: 2320 x 100 ft.
Surface: Grass, sod
Runway 09 Runway 27
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Gradient: 0.5% Gradient: 0.5%
Traffic Pattern: Left Traffic Pattern: Left
Displaced Threshold: No Displaced Threshold: No
Markings: Markings:
Runway End Identifier Lights: No Runway End Identifier Lights: No
Centerline Lights: No Centerline Lights: No
Touchdown Lights: No Touchdown Lights: No
Airport Ownership and Management:
Ownership: Privately Owned
Owner: R E Cassel
25 Shetland Drive
Hummelstown, PA 17036

Manager: Re Cassel
25 Shetland Drive
Hummelstown, PA 17036

Sectional:
Remarks:
  • EXISTED PRIOR TO 1959

FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable for any financial loss, damages or injury due the use of, or reference to the information displayed above. Always call ahead to confirm any information listed and the existence of the destination. Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information. Please read our Disclaimer.