38OH - Industry Air Park, Baltimore, OH
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
Location:
FAA Identifier: 38OH
Latitude/Longitude: 39-50-41.2300N / 082-34-46.5820W
39.8447 / -82.5795
Elevation: 877 feet MSL (Estimated)
Magnetic Variation: 05W (1985)
Land Area Covered: 20 acres
From City: 1 nautical miles E of Baltimore, OH
County/Parish: Fairfield, OH
Airport Operations:
Airport Use: Private
Sectional Chart: Cincinnati
Control Tower: No
ARTCC: Indianapolis Center (ZID)
FSS: Dayton Flight Service Station ()
Attendance: ALL/IREG/IREG
Wind Indicator: Yes
Segmented Circle: No
Lights:
Beacon:
International Operations: No
Landing Fee: No
Communications:
Services:
Airframe Repair: None
Power Plant Repair: None
Bottled oxygen: None
Bulk oxygen: None
Runway Information:
Runway: 18/36
Dimensions: 2550 x 60 ft.
Surface: Grass, sod
Runway 18 Runway 36
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Gradient: 0.1% Gradient: 0.1%
Traffic Pattern: Left Traffic Pattern: Left
Displaced Threshold: No Displaced Threshold: No
Markings: Markings:
Runway End Identifier Lights: No Runway End Identifier Lights: No
Touchdown Lights: No Touchdown Lights: No
Airport Ownership and Management:
Ownership: Privately Owned
Owner: Ron Dipaolo
415 Canal Road N.E.
Baltimore, OH 43105
740-862-4071
Manager: Ron Dipaolo
415 Canal Road N.E.
Baltimore, OH 43105
740-862-4071
Sectional:
Remarks:
  • RWY SOFT WHEN WET.
  • CONES.
  • VFR USE ONLY.

FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable for any financial loss, damages or injury due the use of, or reference to the information displayed above. Always call ahead to confirm any information listed and the existence of the destination. Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information. Please read our Disclaimer.