18PA - Slack, Forest Grove, PA
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
Location:
FAA Identifier: 18PA
Latitude/Longitude: 40-17-37.0600N / 075-03-53.1000W
40.2936 / -75.0647
Elevation: 275 feet MSL (Estimated)
Magnetic Variation: 12W (1985)
Land Area Covered: acres
From City: 3 nautical miles E of Forest Grove, PA
County/Parish: Bucks, PA
Airport Operations:
Airport Use: Private
Activiation Date: 3/1/1961 12:00:00 AM
Sectional Chart: New York
Control Tower: No
ARTCC: New York Center (ZNY)
FSS: Williamsport Flight Service Station ()
Attendance: UNATNDD
Wind Indicator: Yes
Segmented Circle: No
Lights:
Beacon:
Landing Fee: No
Communications:
Services:
Airframe Repair: None
Power Plant Repair: None
Runway Information:
Runway: 14/32
Dimensions: 1850 x 100 ft.
Surface: Grass, sod
Runway 14 Runway 32
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Traffic Pattern: Left Traffic Pattern: Left
Displaced Threshold: No Displaced Threshold: No
Markings: Markings:
Airport Ownership and Management:
Ownership: Privately Owned
Owner: James D. Lonergan
5080 Anderson Rd.
Doylestown, PA 18902
(215) 872-2931
Manager: James D. Lonergan
5080 Anderson Rd.
Doylestown, PA 18902
(215) 872-2931
Sectional:
Remarks:
  • (CONTACT TITLE) AIRPORT OWNER IS LESSEE OF THE PROPERTY. PROPERTY OWNER: FREDERICK SLACK, JR. PO. BOX 362 FOREST GROVE, PA. 215-794-8276.
  • EXISTED PRIOR TO 1959.

FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable for any financial loss, damages or injury due the use of, or reference to the information displayed above. Always call ahead to confirm any information listed and the existence of the destination. Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information. Please read our Disclaimer.