0TX5 - Shiloh, Flower Mound, TX
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
Location:
FAA Identifier: 0TX5
Latitude/Longitude: 33-01-26.4420N / 097-07-11.0410W
33.0239 / -97.1198
Elevation: 635 feet MSL (Estimated)
Magnetic Variation: 07E (1985)
Land Area Covered: acres
From City: 1 nautical miles NW of Flower Mound, TX
County/Parish: Denton, TX
Airport Operations:
Airport Use: Private
Activiation Date: 4/1/1983 12:00:00 AM
Sectional Chart: Dallas-Ft Worth
Control Tower: No
ARTCC: Fort Worth Center (ZFW)
FSS: Fort Worth Flight Service Station ()
Attendance: UNATNDD
Wind Indicator: Yes
Segmented Circle: No
Lights:
Beacon:
Communications:
Services:
Runway Information:
Runway: 17/35
Dimensions: 1800 x 50 ft.
Surface: Grass, sod
Runway 17 Runway 35
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Traffic Pattern: Left Traffic Pattern: Left
Displaced Threshold: No Displaced Threshold: No
Markings: Markings:
Airport Ownership and Management:
Ownership: Privately Owned
Owner: John R. Todd
5600 Wichita Trail
Flower Mound, TX 75028
817-430-1916
Manager: John R. Todd
5600 Wichita Trail
Flower Mound, TX 75028
817-430-1916
Sectional:
Remarks:
  • NO ACFT LANDING, HELICOPTERS ONLY.
  • PRVDD TFC PTN IS ESTABLISHED BLO 2000' MSL DUE TO TERMINAL CTL AREA FROM 2000' MSL UP TO & INCLUDING 8000' MSL & COMPATIBLE TFC PTNS ARE ESTABLISHED WITH WIND MILL HILL ARPT.

FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable for any financial loss, damages or injury due the use of, or reference to the information displayed above. Always call ahead to confirm any information listed and the existence of the destination. Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information. Please read our Disclaimer.