PA35 - Area 52, Bally, PA
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
Location:
FAA Identifier: PA35
Latitude/Longitude: 40-25-55.3460N / 075-37-33.6740W
40.432 / -75.6259
Elevation: 660 feet MSL (Estimated)
Magnetic Variation: 11W (1985)
Land Area Covered: acres
From City: 3 nautical miles NW of Bally, PA
County/Parish: Berks, PA
Airport Operations:
Airport Use: Private
Activiation Date: 9/1/1964 12:00:00 AM
Sectional Chart: New York
Control Tower: No
ARTCC: New York Center (ZNY)
FSS: Williamsport Flight Service Station ()
Attendance: UNATNDD
Wind Indicator: Yes
Segmented Circle: No
Lights: See Rmk
Beacon: White-Green-Yellow (heliport)
International Operations: No
Landing Fee: No
Communications:
Unicom: 122.725
Services:
Airframe Repair: None
Power Plant Repair: None
Runway Information:
Runway: 13/31
Dimensions: 2200 x 50 ft.
Surface: Asphalt
Runway Edge Lights: Low intensity
Runway 13 Runway 31
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Traffic Pattern: Right Traffic Pattern: Left
Displaced Threshold: No Displaced Threshold: No
Markings: Markings:
Airport Ownership and Management:
Ownership: Privately Owned
Owner: Area 52, Llc
244 Dale Road
Barto, PA 19504
(610) 216-1547
Manager: James Francis Krisovitch
244 Dale Road
Barto, PA 19504
(610) 216-1547
Sectional:
Remarks:
  • ACTVT LIRL RY 13/31 - 122.7.
  • ACTVT ROTG BCN - 122.7.
  • VFR USE ONLY.

FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable for any financial loss, damages or injury due the use of, or reference to the information displayed above. Always call ahead to confirm any information listed and the existence of the destination. Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information. Please read our Disclaimer.