96WY - Cedar Creek Ranch, Saratoga, WY
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
Location:
FAA Identifier: 96WY
Latitude/Longitude: 41-24-33.0000N / 106-35-33.0000W
41.4092 / -106.5925
Elevation: 7760 feet MSL (Estimated)
Magnetic Variation: 12E (1995)
Land Area Covered: 2 acres
From City: 10 nautical miles SE of Saratoga, WY
County/Parish: Carbon, WY
Airport Operations:
Airport Use: Private
Activiation Date: 5/1/2000 12:00:00 AM
Sectional Chart: Cheyenne
Control Tower: No
ARTCC: Denver Center (ZDV)
FSS: Casper Flight Service Station ()
Attendance: UNATNDD
Wind Indicator: Yes
Segmented Circle: No
Lights:
Beacon:
Communications:
Services:
Runway Information:
Runway: 04/22
Dimensions: 1500 x 50 ft.
Surface: Grass, sod-Natural soil
Runway 04 Runway 22
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Traffic Pattern: Left Traffic Pattern: Left
Displaced Threshold: No Displaced Threshold: No
Markings: Markings:
Runway: 12/30
Dimensions: 800 x 50 ft.
Surface: Grass, sod
Runway 12 Runway 30
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Traffic Pattern: Left Traffic Pattern: Left
Displaced Threshold: No Displaced Threshold: No
Markings: Markings:
Airport Ownership and Management:
Ownership: Privately Owned
Owner: Thomas D Arthur
707 W Azeele St
Tampa, FL 33606
813-258-1748
Manager: Thomas D Arthur
707 W Azeele St
Tampa, FL 33606
813-258-1748
Sectional:
Remarks:

FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable for any financial loss, damages or injury due the use of, or reference to the information displayed above. Always call ahead to confirm any information listed and the existence of the destination. Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information. Please read our Disclaimer.