6MD2 - Spring Landing, Crumpton, MD
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
Location:
FAA Identifier: 6MD2
Latitude/Longitude: 39-14-45.0000N / 075-53-04.0000W
39.2458 / -75.8844
Elevation: 50 feet MSL (Estimated)
Magnetic Variation: 11W (1990)
Land Area Covered: 5 acres
From City: 2 nautical miles E of Crumpton, MD
County/Parish: Queen Annes, MD
Airport Operations:
Airport Use: Private
Activiation Date: 8/1/1994 12:00:00 AM
Sectional Chart: Washington
Control Tower: No
ARTCC: Washington Center (ZDC)
FSS: Leesburg Flight Service Station ()
Attendance: IREG
Wind Indicator:
Segmented Circle: No
Lights:
Beacon:
Communications:
Services:
Runway Information:
Runway: 15/33
Dimensions: 3250 x 50 ft.
Surface: Grass, sod
Runway 15 Runway 33
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Traffic Pattern: Left Traffic Pattern: Left
Displaced Threshold: No Displaced Threshold: No
Markings: Markings:
Airport Ownership and Management:
Ownership: Privately Owned
Owner: Herbert H Hamilton
Spring Landing
Crumpton, MD 21628
410-778-6695
Manager: Herbert H Hamilton
Sprng Landing
Crumptonmd 21628
410-778-6695
Sectional:
Remarks:
  • PROVIDED DAYLIGHT OPERATIONS; VFR USE ONLY;RY 33 THRESHOLD IS LOCATED TO PROVIDE A 20:1 CLEARANCE; ARPT IS LIMITED TO AIRCRAFT WEIGHING 3900 LBS OR LESS; & YOU EMPLOY SPECIAL EQUIPMENT & PROCEDURES FOR OPERATING IN BWI TCA AIRSPACE.

FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable for any financial loss, damages or injury due the use of, or reference to the information displayed above. Always call ahead to confirm any information listed and the existence of the destination. Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information. Please read our Disclaimer.