5MS1 - Rollang Field, Rolling Fork, MS
Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information.
Location:
FAA Identifier: 5MS1
Latitude/Longitude: 32-57-15.4560N / 090-50-45.3590W
32.9542 / -90.8458
Elevation: 106 feet MSL (Estimated)
Magnetic Variation: 03E (1985)
Land Area Covered: acres
From City: 3 nautical miles NE of Rolling Fork, MS
County/Parish: Sharkey, MS
Airport Operations:
Airport Use: Private
Activiation Date: 5/1/1947 12:00:00 AM
Sectional Chart: Memphis
Control Tower: No
ARTCC: Memphis Center (ZME)
FSS: Greenwood Flight Service Station ()
Attendance: ALL/MON-FRI/0700-1730,ALL/SAT/0700-1200
Wind Indicator: Yes
Segmented Circle: No
Lights:
Beacon:
Landing Fee: No
Communications:
Services:
Airframe Repair: Major
Power Plant Repair: Major
Bottled oxygen: None
Bulk oxygen: None
Runway Information:
Runway: 17/35
Dimensions: 3670 x 75 ft.
Surface: Portland cement concrete - in good conditionrass,
Runway 17 Runway 35
Latitude: Latitude:
Longitude: Longitude:
Elevation: ft. Elevation: ft.
Traffic Pattern: Right Traffic Pattern: Left
Displaced Threshold: No Displaced Threshold: No
Markings: Markings:
Airport Ownership and Management:
Ownership: Privately Owned
Owner: Helena Plantation



Manager: Bill Rainwater
206 Meadow Rd
Rolling Fork, MS 39159
601-873-6273
Sectional:
Remarks:
  • RY 17/35 CENTER IS 2000 FT BY 20 FT CONCRETE.
  • 5 PLANE PORTS.
  • PRIOR TO 1959.

FunPlacesToFly.com and OpenAirNet Inc. shall not be held liable for any financial loss, damages or injury due the use of, or reference to the information displayed above. Always call ahead to confirm any information listed and the existence of the destination. Any information displayed may not be accurate or current and should not be considered valid for navigation, flight planning, or for use in flight. Please consult official publications for current and correct information. Please read our Disclaimer.